Concox GT06N Configuration

< All Topics

Configuring a Concox GT06N vehicle tracker typically involves several steps, which may vary depending on the specific requirements of the installation. Here’s a general overview of the process:

  1. Install the SIM card: The GT06N uses a standard SIM card to transmit location data to a remote server. Before you can configure the device, you’ll need to insert a SIM card into the tracker. Make sure the SIM card has an active data plan and is compatible with the device’s frequency band.
  2. Connect the device to power: The GT06N comes with a power cable that connects to the vehicle’s battery. Once the device is connected, it should power on automatically.
  3. Configure the device settings: To configure the device settings, you’ll need to connect to the device using a computer or mobile device. The device can be configured using SMS commands, GPRS commands, or a web-based platform. Here are some common settings you may need to configure:
  • APN: This is the access point name for the cellular network your SIM card is using. You’ll need to enter this information to enable the device to connect to the network.
  • IP address and port: This is the server address and port number where the device will send location data. You’ll need to enter this information to enable the device to transmit data to the server.
  • Tracking intervals: You can configure how frequently the device sends location data to the server. You can set this to a fixed interval or configure it to trigger based on specific events (e.g., when the vehicle turns on/off).
  • Geo-fencing: You can configure a virtual boundary around a specific area and receive alerts when the vehicle enters or exits the boundary.
  • Alarm settings: You can configure the device to send alarms for specific events, such as speeding, low battery, or tampering.
  1. Test the device: Once you’ve configured the device settings, you should test the device to make sure it’s working properly. You can do this by driving the vehicle and monitoring the location data on the web-based platform or through SMS commands.

It’s important to note that the specific steps and settings for configuring the GT06N may vary depending on the installation and the requirements of the tracking application. It’s always a good idea to consult the user manual or contact the manufacturer for guidance if you’re unsure about any aspect of the configuration process.